LED Shopping Market

Descreption:
(1) LED Piranha Lighting，PVC Cover
(2) Waterproof degree: IP 68
(3) Temperature durable: -20℃～50℃ ; operating temperature: 5℃-50℃
(4) The most advantage of LED module is its long operating life,
more than 50,000hours
(5) Environment protection, easy installation, less maintenance
(6) Max quantity of module per strip is 30pcs
(7) LED Space is 15mm 　
Application:
Advertising market, ex., used in the letter, design, display and so on

Item No.	Color	Wavelength	Voltage	Wattage	Angle	LED   distance	Intensity	LED quantity	Size
DV-WM-3P-R-12A	Red	620-625nm	12V	0.4W	110°-120°	14mm	4.0LM	3 LEDs	47 x 16 x 9mm
DV-WM-3P-Y-12A	Yellow	585-595nm	12V	0.4W	110°-120°	14mm	4.0LM	3 LEDs	47 x 16 x 9mm
DV-WM-3P-B-12A	Blue	465-475nm	12V	0.2W	110°-120°	14mm	3.5LM	3 LEDs	47 x 16 x 9mm
DV-WM-3P-G-12A	Green	515-525nm	12V	0.2W	110°-120°	14mm	6.0LM	3 LEDs	47 x 16 x 9mm
DV-WM-3P-W-12A	White	5000±500k	12V	0.2W	110°-120°	14mm	5.5LM	3 LEDs	47 x 16 x 9mm
DV-WM-3P-WW-12A	Warm White	3500±500k	12V	0.2W	110°-120°	14mm	5.5LM	3 LEDs	47 x 16 x 9mm

Installation Instruction
　 　
Budget the quantity of LED module
　 　
Make sure the arrangement of the LED module at the same apace. The vertical and level space of the LED module is 5-7cm.
The distance between module and the edge of the letter is 4-6cm.
　 　
Design the project of power pack
　 　
Total power consumption = LED module quantity (in budget) x single module power x 1.2
　 　
The installation of the LED module
*Clean the surface.
*Take out the LED module, paste the double-faced papers on the back of the module.
Then put them into the inner side of the box.. or screw them.
*Test it before finishing the installation.
　 　
Cautions
*To avoid bright or dark spot on the Acrylic board, please make sure the distance between the board and the module 8-13cm..
*Make sure the proper polarity of wires to the modules.
* LED module are all low voltage products, please use the corresponding transformer. 220V is not suitable.
*To avoid the module falling off, after using the double-faced papers, we suggest you to use hot-melt adhesive to fix them.
*Making a loop of LED module is necessary for the even light of each module when you use them in the letters and signs.
Y type and H type wires are suggested. Each loop should have the same quantity LED modules.
*Make sure the letter box waterproof when you use the un-waterproof module.
*It is important to use the bright and mix-color performance cover to get the best effect of our backlight LED module.